SONOFF ZBMINIR2 Zigbee Smart Switch Module
SONOFF ZBMINIR2 Zigbee Smart Switch Module
SONOFF ZBMINIR2 is the compact in-wall Zigbee switch module for customers who want to make an existing light circuit smart without replacing the whole faceplate. It is a better current-gen replacement for the older mini relay modules we pulled, and it works well in setups built around eWeLink, Alexa, Home Assistant, ZHA, or Zigbee2MQTT through a compatible hub or coordinator.
- Best for upgrading an existing wall switch or light circuit with Zigbee control
- Detach mode keeps smart bulbs online even when the physical switch is used
- Acts as a Zigbee router to help strengthen nearby mesh coverage
- Compatible with rocker, momentary, and two-way switch styles
- Neutral wire and proper back-box space should be checked before ordering
- Electrical installation should be handled by a qualified electrician
Choose the right path for your setup
ZBMINIR2 is the right pick when you want an in-wall smart switch module. If you are choosing between a relay, a coordinator, or a simpler hub route, this quick guide will save you some second-guessing.
Pick ZBMINIR2
When you want to automate a real light circuit or wall switch and are happy with wiring work.
Pick the SONOFF USB Dongle Plus
When you are building a local Zigbee network for Home Assistant or Zigbee2MQTT and need a coordinator, not an in-wall relay.
When you want the easier hub route first and are still deciding between bridge, gateway, dongle, or Ethernet coordinator options.
Quick answers before you buy
Do I need a hub?
Yes. ZBMINIR2 is a Zigbee device, so it needs a compatible hub or coordinator such as a SONOFF hub, SmartThings, Echo with built-in hub support, or a local coordinator like the SONOFF USB Dongle Plus with Home Assistant.
Does it work without a neutral wire?
No. This model is the neutral-wire version. If your lighting circuit has no neutral at the switch, this is not the one to pick.
When should I choose this over a smart wall switch?
Choose ZBMINIR2 when you want to keep your existing faceplate or wire in automation behind the switch. Choose a full wall switch when you want the switch hardware itself replaced and the finish matters just as much as the automation.
Is it beginner-friendly?
It is beginner-friendly in software, but not as a first electrical install. If you are unsure about neutral wiring or back-box space, treat this as an electrician-fit product rather than a quick DIY add-on.
Stay with ZBMINIR2 if you need the in-wall module itself, or jump to the SONOFF USB Dongle Plus if your real need is a coordinator for local Zigbee control.
Guide: Before buying a Zigbee relay, check Do You Need a Hub for Zigbee Devices? so the wiring plan and the control backbone both make sense.
Recommended next
What pairs well with this relay
ZBMINIR2 needs the right Zigbee coordinator and works best when you pair it with a control layer or a cleaner in-wall alternative.
